-
files/71AL.jpg
-
files/71SS.jpg
-
files/71ST.jpg
-
files/71AL_78df74bc-be96-46ca-bd42-716b18f08b53.jpg
-
files/71SS_ab4cebff-fad8-4cb2-81c7-61471d6cb43b.jpg
-
files/71ST_c1732ff2-f814-4808-881e-cdc2390b595e.jpg
Key Features
Size: AN-10.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-10 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-10.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS stainless steel AN-10 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-10.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS steel AN-10 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-12.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-12 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-12.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS stainless steel AN-12 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-12.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS steel AN-12 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-16.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-16 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-16.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Stainless Steel AN-16 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-16.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Steel AN-16 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-3.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-3 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-3.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS stainless steel AN-3 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-3.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Steel AN-3 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-4.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-4 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-4.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS stainless steel AN-4 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-4.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Steel AN-4 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-6.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-6 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-6.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS stainless steel AN-6 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-6.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS steel AN-6 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-8.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-8 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-8.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS stainless steel AN-8 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-8.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS steel AN-8 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-10.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-10 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-10.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS stainless steel AN-10 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-10.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS steel AN-10 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-12.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-12 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-12.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS stainless steel AN-12 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-12.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS steel AN-12 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-16.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-16 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-16.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Stainless Steel AN-16 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-16.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Steel AN-16 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-3.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-3 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-3.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS stainless steel AN-3 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-3.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Steel AN-3 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-4.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-4 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-4.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS stainless steel AN-4 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-4.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Steel AN-4 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-6.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-6 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-6.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS stainless steel AN-6 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-6.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS steel AN-6 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-8.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-8 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-8.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS stainless steel AN-8 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-8.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS steel AN-8 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
- Regular price
- $12.89
Frequently Bought Together
-
Vendor: DFW Speed Syndicate
Ford 240/300 Guide Plates - 3/8
Regular price $50.00 -
Vendor: DFW Speed Syndicate
Aftermarket EFI Tuning
Regular price From $400.00 -
Vendor: DFW Speed Syndicate
Ford 240/300 Guide Plates - 5/16
Regular price $50.00 -
Vendor: DFW Speed Syndicate
Offenhauser Ford 240/300 Side Cover Non-Polished
Regular price $195.00
Product Description
Key Features
Size: AN-10.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-10 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-10.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS stainless steel AN-10 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-10.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS steel AN-10 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-12.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-12 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-12.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS stainless steel AN-12 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-12.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS steel AN-12 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-16.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-16 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-16.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Stainless Steel AN-16 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-16.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Steel AN-16 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-3.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-3 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-3.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS stainless steel AN-3 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-3.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Steel AN-3 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-4.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-4 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-4.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS stainless steel AN-4 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-4.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Steel AN-4 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-6.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-6 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-6.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS stainless steel AN-6 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-6.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS steel AN-6 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-8.
Weld-on 6061 aluminum bung with male 37 degree flare.
Suitable for custom fabrication projects like oil catch cans, swirl pots, reservoirs, fuel cells, steam ports, and oil pans.
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS Aluminum AN-8 Weld Bungs are machined from 6061 aluminum and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-8.
Weld-on 304 stainless steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS stainless steel AN-8 Weld Bungs are machined from 304 stainless steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Key Features
Size: AN-8.
Weld-on mild steel bung with male 37 degree flare.
Suitable for custom fabrication projects such as turbo oil return, anti-lag system, coolant lines, oil tanks, gas tanks, and much more
Features a raised section on the back side of the bung to keep the part positioned when welding.
Compatible with water, coolant, air, oil, hydraulic fluid, and most fuels.
HPS steel AN-8 Weld Bungs are machined from mild steel and are compatible with 37 degree AN flare fittings. The back side of the fitting has a raised feature to keep the part aligned for welding. HPS Weld Bungs come in a raw uncoated finish to minimize the amount of prep work for assembly.
Customer Reviews
Similar Products
-
Vendor: DFW Speed Syndicate
Ford 240/300 Guide Plates - 3/8
Regular price $50.00 -
Vendor: DFW Speed Syndicate
Aftermarket EFI Tuning
Regular price From $400.00 -
Vendor: DFW Speed Syndicate
Ford 240/300 Guide Plates - 5/16
Regular price $50.00 -
Vendor: DFW Speed Syndicate
Offenhauser Ford 240/300 Side Cover Non-Polished
Regular price $195.00
